Technical Guidance
Fire classification is a critical factor when selecting insulation materials, particularly within façade systems and external wall constructions. Understanding how materials are classified helps ensure compliance with building regulations and supports safe, effective system design.
The European classification system, often referred to as Euroclass, is widely used to assess the fire performance of construction products, including insulation.
Euroclass is a system used to classify how construction materials react to fire. It assesses factors such as combustibility, flame spread and heat release.
Materials are classified from A1 (non-combustible) through to F (easily combustible).
This classification helps specifiers and contractors understand how a material will behave in a fire scenario.
A1 materials are considered non-combustible and do not contribute to fire development under test conditions.
They are commonly used in applications where the highest level of fire performance is required.
A2 materials have very limited contribution to fire and meet strict performance criteria under testing.
They are often used in façade systems and other applications where high fire performance is required but system design may vary.
While A1 and A2 are most commonly referenced in façade applications, other classifications include:
In addition, classifications may include suffixes relating to smoke production and flaming droplets.
Fire classification plays an important role in:
It is particularly important for external wall systems and multi-storey buildings.
Different insulation materials have different fire classifications.
For example:
Material selection should always consider the full system and application requirements.
It is important to understand that fire performance is not determined by a single product alone.
Instead, performance depends on the complete system, including:
Correct specification ensures all elements work together to meet required standards.
Fire classification is closely linked to UK building regulations and guidance relating to fire safety.
Compliance should always be verified using:
Early design coordination is essential to ensure appropriate material selection.
A2 materials perform very well but are not classified as non-combustible in the same way as A1.
Fire performance depends on the entire system, not just one material.
The correct classification depends on the specific building type, design and regulatory requirements.
Understanding fire classification is essential when selecting insulation materials. By considering Euroclass ratings alongside system performance and regulatory requirements, contractors and specifiers can make informed decisions that support safety and compliance.
FGF supplies insulation materials alongside façade systems, membranes and fire protection products, supported by technical guidance and nationwide delivery.
Talk to our team for support with product selection and system compatibility.